CertainTeed Accessory Products
From start to finish...CertainTeed Hip & Ridge and Starter Accessories are designed to work with CertainTeed shingles to give your roof a professional finished look. Ask your Contractor about the following accessory products for your CertainTeed shingle installation:
Hip and Ridge Shingles
Starter Shingles
Hip & Ridge Accessory Products
|
Shangle Ridge® Accessory Hip and Ridge Accessory Shingles are designed specifically for use with Grand Manor, Centennial Slate™ and Carriage House shingles and are used to finish the hips and ridges of your roof.
- Two full layers
- 12" x 18", with 8" exposure
- Covers 10 lineal feet per box
- Algae resistant
- Matches all Grand Manor, Centennial Slate and Carriage House colors
- Pre-cut for easy installation, with a centering notch for a no-miss side-to-side alignment
|
Shangle Ridge
|
|
Presidential Accessory Hip and Ridge Accessory Shingles are designed specifically for use with Presidential Shake™ and Presidential Shake™ TL shingles and are used to finish the hips and ridges of your roof.
- Easy to separate into three individual pieces by folding along pre-cut lines
- Designed to match the dimensionality and depth of shingles
- Available in colors to coordinate with shingles
- English - 12" x 36", with 5" exposure; covers 30" lineal feet per bundle
- Metric - 13 1/4" x 39 3/8", with 5-5/8" exposure; covers 45 linear feet
- Also available in an impact resistant version for use with Presidential Shake Impact Resistant shingles
|
Presidential Accessory
|
|
Hatteras® Accessory Hip and Ridge Accessory Shingles are designed specifically for use with Hatteras shingles and are used to finish the hips and ridges of your roof.
-
Matches all Hatteras colors
-
Algae Resistant
-
12" x 18", with 8" exposure
-
Covers 36 lineal feet per bundle
-
Pre-scored for easier installation
|
Hatteras Accessory
|
|
Mountain Ridge™ Hip and Ridge Accessory Shingles are designed specifically for use with Presidential TL, Presidential Shake, Landmark TL, and Landmark Series shingles and are used to finish the hips and ridges of your roof.
-
Fiberglass reinforced SBS modified bitumen
-
Five layer design with tri-laminate base
-
Available in 8" and 10" widths
-
8" exposure
|
Mountain Ridge
|
|
Shadow Ridge™ Hip and Ridge Accessory Shingles are designed specifically for use with Landmark™ TL, Landmark Series, Woodscape® Series, Independence™, Classic Horizon™ New Horizon® and Patriot™ shingles and are used to finish the hips and ridges of your roof.
-
Easy to separate into individual pieces by folding along pre-cut lines
-
Can be doubled - coursed to accent rooflines and enhance overall appearance
-
Size and color availability can vary by region
- English - 12" x 36", with 5" exposure; covers 30 lineal feet per bundle
-
Metric - 13-1/4" x 39-3/8", with a 5-5/8" exposure: covers 33 lineal feet per bundle
|
Shadow Ridge
|
Starter Shingle Products
High-Performance Starter
Starter course shingle specifically for use with Grand Manor, Centennial Slate and Hatteras shingles - and the only approved installation alternative to using the shingles themselves.
- "Hatteras" dual-sealant strips at bottom edge for 110 mph wind resistance
- Installation is a snap - no need to cut tabs off expensive shingles
- Provides a straight factory-cut eave edge for a clean look
- Required for Hatteras wind warranty coverage
- 10" x 36" starter strip
- 34 pieces (102 linear feet) per bundle
Presidential Starter
Required for Presidential Shake TL and Presidential Shake applications
- Assures Class A fire rating
- Two layers of straight factory-cut eave edge
- Available in the entire Presidential TL and Presidential Shake color line
- Also available in an impact resistant version for use with Presidential Shake Impact Resistant shingles
- 13-1/4" x 40", 22 pieces (36 linear feet of double-layer coverage) per bundle
Swiftstart Starter
Metric starter shingle is designed specifically for use with Landmark Series shingles. Rather than cutting expensive field shingles to use as starters, you can save time and money by starting with Swiftstart.
- Code-compliant, meets min. 2" headlap requirement for metric shingles; many competing products do not
- 15-1/4" x 38-1/4" non-perforated (7-5/8" x 38-1/4" perforated)
- Each 18-piece bundle covers 116 linear feet
- Recommended for use to obtain enhanced warranties
CertainTeed Starter - Metric
Pre-cut starter for use under metric sized shingles (13-1/4" x 38-3/4")
- 10" x 38-3/4", 25 shingles per bundle
- 80 linear feet per bundle